What is Osmocote for Calathea

You may be familiar with different organic and inorganic fertilizers. Osmocote fertilizer is one of them. Usually, professional gardeners use Osmocote fertilizer despite it being an expensive synthetic fertilizer. They do that because of its quick results for their costly plants. Osmocote fertilizer is also a good choice for Calathea.

What is Osmocote Fertilizer?

Osmocote fertilizer looks like a peppercorn with an off-white color. They are recognized as prills. Before planting, you are able to scatter the prills on the top of the garden soil. When the soil becomes warm or irrigation reaches the prills, the nutrients spill out of the shell to set in the soil. The plant roots observe them and fulfill their needs for food. Osmocote fertilizer works for 4-6 months without harming your plants because it is formulated depending on the slow-release formula with no chemicals. For indoor or outdoor plants, you have to apply Osmocote every 6 months. For fruits and vegetables, it is best to apply Osmocote every 4 months.

Osmocote for Calathea
Some Methods to Apply Osmocote Fertilizer

A few gardeners may not be interested in using fertilizers because they have bad experiences regarding them. The reason behind it is that they do not have proper knowledge about using fertilizers. They do not know how to apply fertilizers properly at the correct time. However, avoiding fertilizer is not the solution. Here, we are going to share some methods to apply Osmocote fertilizer.

Read also: Calathea Fertilizer Requirements

Method 1: Deep Soil

Deep soil is the ideal method for those who are making their yard for planting but show nothing yet. If you apply this application deeply after planting, it will just damage your yard.

The first thing that you have to do is to determine the place’s size where you want to add fertilizer. After that, you are able to dig the soil deeply at the size you need. Please take the Osmocote fertilizer and follow the directions labeled on the package. When you apply it to the planting area, you are able to mix the fertilizer into your soil properly. You do not forget to wear safety gloves before spreading the fertilizer. If you think there is no requirement to apply Osmocote for the large area, then you are able to limit the application to the place where you are going to plant. You will be able to call this a dibbling method.

To start it, you need to dig a planting hole for seeds, a little deeper than the hole you usually dig. In the bottom of the hole, you are able to put the required amount of fertilizer. If you are planting a particular root system, you are able to use 20 percent less fertilizer than the usually used application method. After filling the bottom, just plant your seeds as you do normally. This method is preferable. It requires less food. After planting, you are able to water the soil properly to establish the plant’s root system.

Method 2: Topdressing

For those who want to fertilize the area where your plants have already grown, please select the technique of topdressing. Please spread the fertilizer across the surface with your hand. You have to be careful while watering the soil because this application needs less water. Lots of slow-release fertilizers are operated by moisture, thus too much rain and water will be able to wash away prematurely. Keep in mind that Osmocote releases by Osmosis, putting nutrients into the soil for 4 to 6 months continuously.

Method 3: Banding

This is a fertilizing technique which works well for the plants that have already been planted in rows. Please make two-inch furrows on the side of plants and put the fertilizer in them. The depth of those furrows must be two inches deeper than the original seed furrow. If you have dug furrows for irrigation on both sides of the plants, then the new fertilizing lines must be between them and the plants. If you are using a drip hose, you are able to add the fertilizer under the transistor. This may take a long space in your garden. However, it is effective to handle long rows of vegetables and flowers.

Method 4: Repotting

You are able to apply one of the above methods to your indoor and outdoor plants. On the other hand, if you want to refresh the soil, repotting is the best procedure. To apply this technique, you have to be more careful than before. First, you are able to take out the plant from the soil carefully. After that, you have to put the right amount of fertilizer into the soil. Please spread the prills in a way that they cannot be hurt. Because it can leave a bad effect on their performance. You are able to repot the plant again with care and water it normally.

How to Use Osmocote Fertilizer for Indoor Plants?

Since Osmocote is a slow-release formula, you are able to apply it to indoor plants. Also, it shows the best results and feeds your plants inside properly.

Here are some directions to use Osmocote Fertilizer for indoor plants:

    • At the first step, you have to take Osmocote fertilizer and sprinkle one scoop of prills into the plant pot.
    • After that, mix the topsoil into 1-3 inches.
    • Then, water the plant.
    • Please reapply the fertilizer every six months.

Soon you are going to see the results. You are able to repeat the process every 4 months round the year.

How to Use Osmocote Fertilizer for Outdoor Plants?

For outdoor plants, you are able to choose the area where you want to apply it and follow the instructions below:

    • Firstly, dig the soil 3 inches deep to spread the fertilizer.
    • Please do this process across the area you want to fertilize.
    • Then, sprinkle the prills of Osmocote in the soil to feed the plants.
    • While transplanting or repotting, you are able to mix the prills into the soil.
    • Now, you have to water the soil according to its needs.
    • Please avoid overflowing the soil.
    • You will be able to apply it every 4 months in the growing season.

Leave a Reply

Your email address will not be published.